5 ply Corrugated cardboard production line Span Bridge

This device is installed on the bridge of the production line.

FDA Wind-Suction Tension Cardboard Device on Bridge

Characteristics:

1.This device is installed on the bridge of the production line, to tense cardboard. Frequency conversion might be to adjust the flux of wind; the alignment of cardboard is controlled by electromotion-motion.

2.On-bridge auto alignment and tension control are available to settle the problem of cardboards displacement.

Specification:

Valid Width: 1400mm-2800mm.

Pile-Up Control Device

Characteristics:

Detected and adjusted by PLC automatically, the speed of the double facer and single facer are matched, which is good for not only cardboards pile-up amount on bridge, but for evaporation and formation of cardboard. It also helps to decrease the waste of paper in production.

1.According to the production of different cardboard, there is single deck, double, and triplex decks convey on the bridge.

2.Paper width and transverse movement are adjusted by electromotion.

3.With vacuum suction device, the tension of cardboard is controlled adjustable.

4.With 2 sets of control panels, the operation may take place on the bridge or under the bridge.

Safety fences at two sides and ladders are available.

Technical Parameters:

(mm) Max. Scroll Width	(mm) Length	(mm) Width	(mm) Height	(ton) Weight	(kw)Power
1400	2400	900	1800	1.6	7
1600	2600	900	1800	1.8	7
1800	2800	900	1800	2	7
2000	3000	900	1800	2.5	7
2200	3200	900	1800	2.8	8.5
2500	3500	900	1800	3.0	8.5
2800	3700	900	1800	3.5	8.5

5 ply Corrugated cardboard production line Span Bridge